Cooling Method: | Counter Flow /Cross Flow |
---|---|
Ventilation Mode: | Natural Ventilation |
Material: | Concrete |
Air Contact Form: | Wet and Dry |
Air Contact Way: | Open |
Tower Shape: | Round /Square/Other |
Customization: |
---|
Suppliers with verified business licenses
Latino manufactures a large variety of cooling tower that can be used for both industrial and civil perposes.
The capacity ans the style of the cooling tower vary, one cell capacity rangs from 5 m³/h to 6000m³/h, tower shape range from quadrate, round to polygons, structure includes steel structure, concrete structure and FRP structure. Tpwer type ranges from cross flow cooling tower to counter flow cooling tower, from mechanical draft to natural draft, from forced draft to induced draft, from clear water tower to turbid water tower.
Process principle:
The air intake style is inlet from the bottom of the tower,which is a lternating direction interative with the fall down spray water and form to saturated vapor in the process.the heat is exhausted out of tower by the fan and the water is collected to bottom tank and circulate continuously by the special evaporator.there is no heat sinking fillings inside of the tower,so more space is saved to increase coil sradiating area.tight structure lead tolittle area take up.this apply especially to dealing wih low temperature fluid.
Product characteristics
1.tight structure
reducing the space of heat exchange stuffing makes the equipment much tighter less occupied space and convenient for shipping and installation.it is more suitable for severe enviroment,such as steel plant,foundry,and all kinds of mine plants,etc.
2.elliptical tube design
compared with round tube,using elliptical tube as heat exchanger coils can make the form tighter,less filling tate of liquid and less air flow resistance.
3.precooling fin design
we can increase the precooling fin on the cooling tower,precooling of high temperature or stop the water at low temperature.more suitable for serious water shortage area.
Counter flow series principle of operation
1.water is pumped over the evaporative coil at a 6.9L/S of coil face area to ensure continuous flooding of the primary heat transfer surface which enhances heat transfer efficiency and minimizes fouling and scale formation.
2.high-effective water eliminater is made of PVC,can filter the drips from expelted airsteams.radiation-enduring and long lifespan.with the access door on the eliminators side panels.
3.easy removable air inlet grating avoids sun projectivity dust and dirt coming in.
4.for applications that might deposit soluble scale or sludge tithin the tubes,the cleannable header tube bundle provides removable cover plates.
01- Technical Data Sheet
Modle | water Flow | Motor | Dimensions | Pump Head | Weight |
LRCM-DD | M3/H | KW | MM | mh20 | kg |
100 | 100 | 3.7 | 2005*2880*2850 | 3.6 | 850 |
125 | 125 | 3.7 | 2410*3180*2850 | 3.6 | 1030 |
150 | 150 | 3.7 | 2510*3380*2850 | 3.6 | 1120 |
175 | 175 | 3.7 | 2810*3380*2850 | 3.6 | 1200 |
200 | 200 | 5.5 | 2910*4180*2950 | 3.6 | 1540 |
225 | 225 | 5.5 | 2810*5480*3000 | 3.6 | 1860 |
250 | 250 | 7.5 | 2810*5480*3400 | 4.0 | 2000 |
300 | 300 | 7.5 | 3320*6080*3800 | 4.4 | 2300 |
350 | 350 | 7.5 | 3320*6080*4600 | 5.2 | 2420 |
100C2 | 200 | 3.7*2 | 4010*2880*2850 | 3.6 | 1600 |
125C2 | 250 | 3.7*2 | 4820*3180*2850 | 3.6 | 1960 |
150C2 | 300 | 3.7*2 | 5020*3380*2850 | 3.6 | 2140 |
175C2 | 350 | 3.7*2 | 5620*3380*2950 | 3.6 | 2300 |
200C2 | 400 | 5.5*2 | 5820*4180*2950 | 3.6 | 2980 |
225C2 | 450 | 5.5*2 | 5620*5480*3000 | 3.6 | 3580 |
250C2 | 500 | 7.5*2 | 5620*5480*3400 | 4.0 | 3840 |
300C2 | 600 | 7.5*2 | 6640*6080*3800 | 4.4 | 4420 |
350C2 | 700 | 7.5*2 | 6640*6080*4600 | 5.2 | 4640 |
04 The Limited Value of Water Analysis
Parameter | Make up water | Circulating Water | Parameter | Make Up Water | Circulating Water |
PH Value | 6-8 | 6-8 | Chloric Acid IOD (CL-) ppm |
50 below | 200 below |
Electric Conductivity | 200below | 500 below | Sulphuric ACID ION ppm | 50 below | 200 below |
Total Hardness | 50below | 200 below | Silicic ACID ppm | 30 below | 50 below |
Malkainity | 50 below | 100 below | Ferric (Fe) ppm | 0.3 below | 1.0 below |
05-Instruction For The Cooling Tower Components
CASING AND WATER BASIN
Fiberglass reinforced polyester (FRP) is produced with the water-resistance resin and superior quality fiberglass mat. With good moisture, high gel,high strength, spray the gel-coat on FRP parts by machine and is thermal formed.
FAN & DRIVING SYSTEM
All the cooling tower fans with the adjustable pitch blades are applied to being balanced, it operates stably and quietly. The material for cooling tower fan are A.B.S, aluminum alloy for normal standard, F.R.P or stainless steel material available for all your options.Small capacity cooling tower adopts direct drive low noise fan. Bigger capacity fan equipped with Belt drive speed reducer or Gear box.
WATER DISTRIBUTION SYSTEM
Using high coefficient rotating sprinkler head which is made of plastic or aluminum alloy could reduce the pressure of friction loss, and the water can be distributed evenly to achieve the max thermal cooling performance.
COOLING TOWER FILL PACKING
Used high quality & improved performance PVC with good material, it is high cooling efficiency and anti-corrosive & UL V-0. The surface of cooling tower infill is corrugated to increase the filling pitch to make sure that infill is clog-free and overcome the problem of water quality. Special material for option if high entering water temperature.
COOLING TOWER FRAME
The cooling tower framework is made of hot dip galvanized steel (HDGS) or FRP, to makes the cooling tower in rust-free, durable and long service life.
06- Relevant Cooling TowersSuppliers with verified business licenses