After-sales Service: | 1 Year |
---|---|
Warranty: | 1 Year |
Cooling Method: | Counter Flow |
Ventilation Mode: | Natural Ventilation |
Material: | PVC |
Air Contact Form: | Wet and Dry |
Samples: |
---|
Customization: |
---|
Suppliers with verified business licenses
Counter Flow Cooling Tower PVC Film Fill Material
The cooling tower fills are conforming to ASTM D1784 with the following properites:
PROPERTY | TEST METHOD | UNIT | TYPICAL VALUE |
Specific Gravity | D792 | gm/cu.cm | 1.45 max. |
Vicat Softening Point | D648 | ºC | 68 ºC max. |
Tensile Strength | D638 | psi | 6000 min. |
Fire Classification | E-84 | Class A | |
Flammability | D635 | self extinguishing less than 5 sec. |
The Counter Flow Cooling Tower PVC Film Fill Materialalso called cooling tower fill, cooling tower infill, it is an essential component in the evaporative heat rejection process. Variations in total surface area, pressure drop, and material of construction are readily available to the consumers to optimize the cooling tower for a specific water quality and water temperature.
The use of alternate cooling tower fill media should not be considered a substitute for a proper water treatment program or solids filtration (if required) that matches the required application. "Contamination" references in this document refer to suspended and dissolved solids, process particulates, oils, and grease, not bacteria or biological contamination.
This bulletin will serve to educate the reader on a few of the most common cooling tower fill media variations used in both commercial and industrial applications. The list begins with the highest efficiency per cubic foot of media (lowest fouling tolerance) and ends with the highest fouling tolerance (lowest efficiency per cubic foot of media).
Suppliers with verified business licenses