Cooling Tower Fill for Evapco

• Material: PVC
• Application: Evapco Cooling Tower
• Sheet Pitch: 20mm
• Installation: Glued Block
• Cooling Type: Counterflow and Crossflow Cooling Tower
• Transport Package: Wooden Pallet
• Model NO.: 9620
• Specification: 500/610mm
• Trademark: Latino
• Origin: China
• Production Capacity: 100000 Square Meter One Day

Product Description

Cooling Tower Fill for Evapco

Cooling tower fill also called cooling tower heat transfer media, it is an essential component in the evaporative heat rejection process. Variations in total surface area, pressure drop, and material of construction are readily available to the consumers to optimize the cooling tower for a specific water quality and water temperature.

The use of alternate cooling tower fill media should not be considered a substitute for a proper water treatment program or solids filtration (if required) that matches the required application. "Contamination" references in this document refer to suspended and dissolved solids, process particulates, oils, and grease, not bacteria or biological contamination.

This bulletin will serve to educate the reader on a few of the most common cooling tower fill media variations used in both commercial and industrial applications. The list begins with the highest efficiency per cubic foot of media (lowest fouling tolerance) and ends with the highest fouling tolerance (lowest efficiency per cubic foot of media).

Vertical Fluted Wide Gap Fill (Counterflow Heat Transfer)

• Packaged or Field Erected Tower Fill Media for Moderate Water Contamination
• Approximately ¾" Fill Sheet Spacing
• Typical Applications Include Moderate to Heavy Industrial, Power Generation or Where Make-Up Water Quality Exceeds Cross-Fluted Recommendations
• Suggested TSS1 < 150 PPM3 and TDS2 < 5,000 PPM3 as Calcium Carbonate
• Oils or Greases up to 5 PPM3 , No Fibers
• Some Variations Include Offset Vertical Flutes For Increased Thermal Performance (shown to the left) with a suggested TSS1 < 100 PPM3




Relevant Cooling Tower Components:





LATINO has an experienced team in quality and project implement to support the purchasing activities of overseas customers;The company's main products are cooling tower parts, such as Film Fill, drift eliminator and spray system, UPVC distribution pipes, FPR winding splash pipe, FRP profile parts,FRP gratings, Fan stack, band & clamp, etc.; Our product are approved by CTI and we have our own patent .


Our Company 

Tianjin LATINO Environmental Technology Co., Ltd. are on the base of high quality, good service, we win good reputation in the industry. We help our customers better to get cooling tower products from China.We specializes in manufacturing various cooling tower and parts. Our company's cooling tower products is being used widely around the world. Our business involve in Italy, Germany, Australia, UK, Indonesia, Thailand, Belgium, France, Poland, India, Malaysia, Singapore and New Zealand, etc..

Latino has a high quality team of talents. Team members are young and energetic, with a sense of innovation and the courage to meet the challenge.Team members develop and practice new e-marketing mode, follow consumer demand, provide customers with high quality products and services.

LATINO has an experienced team in quality and project implement to support the purchasing activities of overseas customers;The company's main products are cooling tower parts, such as Film Fill, drift eliminator and spray system, UPVC distribution pipes, FPR winding splash pipe, FRP profile parts,FRP gratings, Fan stack, band & clamp, etc.; Our product are approved by CTI and we have our own patent .
 
Our factory has the largest capacity and have been working with the recognized brands of cooling tower in around the world, our team have rich experience in oversea projects.we were your colleague, knowing your care, your culture and your requirements.So we make it easy for you to purchase high quality and good value internal plastic parts of cooling tower in China.

Our fill has been verified by actual operation for more than ten years. It is very reliable and efficient. You can rely on us to deliver a successful project while reducing your total project costs!



FAQ


Q1. What's your Main Product ?
The company's main products are cooling tower and Cooling tower parts such as Film Fill, drift
 eliminator and spray system, UPVC distribution pipes, FPR winding splash pipe, FRP profile parts,
FRP gratings, Fan stack, band & clamp, etc

Q2:How to define the product price?
A: PVC cooling Tower  material is based on the thickness,vicat point, color, density,fire classification, packing and quantity.

Q3. Do you keep the stock of your products?
A: Yes, we maintain a certain amount of standard products inventory, in time to meet your needs.

Q4. Whether you have the ability to accept the product customization?
A: Products can be customized, we can make the new thermoforming or extruding mode based on your drawings and we can sign a confidentiality agreement about your patented product, pls contact us for any further information.

Q5: What's your delivery time ?
The delivery time normally will be 10 -30days , the specified delivery date will be according to customer request and order quantity .

Q6. How to reassure those who doubt the product quality and actual situations?
A professional system can ensure the whole latest development which will be monitored by you through the reports in the diffferent stages.

Q7.How about your after sale service?  
1. Warranty service
a).Warranty: 1 year.
b) .Warranty starting: acceptance date.  
2. Service commitment
Warranty period:
a). Our company will be responsible for the quality problems arising from the maintenance, replacement of parts and related materials.
b). Artificial damage will be repaired by our company, but the damaged devices shall be paid.
3. Expiration of the warranty period:
a). Our company provides lifelong maintenance, but the user is responsible for the cost of labor and material.
b). Our company also provides charging upgrades and improvements following to the customer's requirements.