Liangchi Lbcm Round Bottle Type Induced Draft Cooling Tower

• Cooling Method: Counter Flow
• Ventilation Mode: Mechanical Ventilation
• Material: FRP
• Air Contact Form: Wet and Dry
• Air Contact Way: Open
• Tower Shape: Round
• Noise Level: Low
• Application Fields: Industrial
• Certification: ISO
• Condition: New
• Usage: Water Cooling
• Transport Package: Wooden Packages
• Specification: Customized
• Trademark: LATINO
• Origin: China
• Production Capacity: 2000 Sets One Year

Product Description

Liangchi LBCM Round Bottle Type Induced Draft Cooling Tower 

 01- Technical Data Sheet 

Modle		water Flow		Motor		Fan	Dimensions		Pipe Connection
		M3/H					MM		Inlet	Outlet	Drain	Over Flow
LBCM-	LBC-	WB28ºC	WB27ºC	KW	Hp	D(mm)	H	D	mm
	3	2.1	2.5	0.12	1/6	500	1335	750	25	25	20	25
3	5	3.2	3.7	0.12	1/6	500	1410	750	40	40	20	25
5	8	5.5	6.6	0.12	1/6	500	1690	860	40	40	25	25
	10	6.7	7.8	0.18	1/4	670	1835	1060	40	40	25	25
10	15	10	11	0.18	1/4	670	1940	1170	50	50	25	25
	20	13.5	15.6	2110	1170	0.18	1/2	770	50	50	25	25
	25	17	20.4	2170	1170	0.37	3/4	770	50	50	25	25
	30	20	23.5	2205	1380	0.55	1	770	65	65	50	25
	40	27	31.2	2117	1580	0.75	1.5	970	65	65	50	25
30	50	34	39.7	2410	1820	1.1	1.5	970	65	65	50	25
	60	42	46.8	2137	2000	1.1	1.5	1170	80	80	50	25
	70	47	53	2287	2000	1.1	1.5	1170	100	100	50	25
50	80	55	63.5	2565	2175	1.5	2	1170	100	100	50	25
65	100	70	81.9	2645	2175	2.2	3	1470	100	100	50	25
80	125	86	100.5	2780	2650	2.2	3	1470	125	125	50	50
100	150	103	118.5	2785	3300	3.7	5	1750	125	125	50	50
	`175	123	134.5	2885	3300	3.7	5	1750	125	125	50	50
125	200	137	158.9	3490	3770	3.7	5	1750	125	125	50	50
150	225	158	181.5	3690	3770	5.5	7.5	2350	150	150	50	50
175	250	175	205	3690	3770	7.5	10	2350	150	150	50	50
200	300	215	247.3	3850	4440	7.5	10	2350	200	200	50	100
	350	243	284.0	4180	4790	7.5	10	2350	200	200	50	100
250	400	277	324.6	4340	5180	11	10	2970	200	200	50	100
300	450	320	368.1	4430	5580	11	15	2970	200	200	50	100
350	500	355	408.3	4430	5580	15	15	3380	250	250	50	100
400	600	415	477.3	4790	6600	15	20	3380	250	250	50	100
450	700	460	534.7	4790	6600	22	30	3580	250	250	80	100
500	800	509	592.5	5300	7600	22	30	3580	250	250	80	100
600	900	615	707.5	5745	7600	22	30	3580	300	300	80	100
700	1000	710	816.6	5745	8430	30	40	4270	300	300	80	100
750	1100	765	867	6220	8430	30	40	4270	300	300	80	100
800	1200	800	920	6520	8430	30	40	4270	300	300	80	100
900	1350	900	1032	6520	8430	37	50	4270	300	300	80	100

02- Liangchi Cooling Tower Accessories 

03-Schematic Diagram



04 The Limited Value of Water Analysis 

Parameter	Make up water	Circulating Water	Parameter	Make Up Water	Circulating Water
PH Value	6-8	6-8	Chloric Acid IOD (CL-) ppm	50 below	200 below
Electric Conductivity	200below	500 below	Sulphuric ACID ION  ppm	50 below	200 below
Total Hardness	50below	200 below	Silicic ACID ppm	30 below	50 below
Malkainity	50 below	100 below	Ferric (Fe) ppm	0.3 below	1.0 below

05-Instruction For The Cooling Tower Components

CASING AND WATER BASIN

Fiberglass reinforced polyester (FRP) is produced with the water-resistance resin and superior quality fiberglass mat. With good moisture, high gel,high strength, spray the gel-coat on FRP parts by machine and is thermal formed.

FAN & DRIVING SYSTEM

All the cooling tower fans with the adjustable pitch blades are applied to being balanced, it operates stably and quietly. The material for cooling tower fan are A.B.S, aluminum alloy for normal standard, F.R.P or stainless steel material available for all your options.Small capacity cooling tower adopts direct drive low noise fan. Bigger capacity fan equipped with Belt drive speed reducer or Gear box.

WATER DISTRIBUTION SYSTEM

Using high coefficient rotating sprinkler head which is made of plastic or aluminum alloy could reduce the pressure of friction loss, and the water can be distributed evenly to achieve the max thermal cooling performance.

COOLING TOWER FILL PACKING

Used high quality & improved performance PVC with good material, it is high cooling efficiency and anti-corrosive & UL V-0. The surface of cooling tower infill is corrugated to increase the filling pitch to make sure that infill is clog-free and overcome the problem of water quality. Special material for option if high entering water temperature.

COOLING TOWER FRAME

The cooling tower framework is made of hot dip galvanized steel (HDGS) or FRP, to makes the cooling tower in rust-free, durable and long service life.

06- Relevant Cooling Towers

WORKING PRINCIPLE

1. Working fluid (water, oil or other flowing liquid) flowing inside of the coils, which is enwrapped by the cooling tower spray water on the outside. The heat of working fluid is transferred by the coil and become the saturated vapor when meeting the water and air.

2. The heat is exhausted out of the cooling tower by the cooling tower by the top fan; water is collected back to the bottom tank and circulates continuously. The cooling tower spray water is cooled down via cooling tower PVC fill in the process of circulation, and flow is the same direction with the fresh wind. The coil mainly takes sensible heat travel style.

3. The most benefit of this style is can avoid scale formation on the outside of the coil. And this will apply especially to dealing with high-temperature fluid (e.g. 60°C) or the fluid need big temperature difference (e.g. 60°C to 32°C).

Cooling tower body structure and performance

This fiber reinforced plastic cooling tower body is made of high-quality fiberglass reinforced plastics, the rubber coating surface of which is made of imported raw materials, which is even in color and will not fade or degrade easily.All structure parts made of steel are processed in hot-galvanizing.Injected molded parts are used widely for they are erosion-proof, high in intensity, light in weight and easy to attach.

The cooling tower has a successful water floating control, rendering a loss less than 0.001%.

-Use low-speed wind machine to avoid too much water spray in the air;

-Use waterproof sleeves on water distribution pipes to collect spilled water;

-The ground frame is larger than enclosure and is equipped with PVC shutters to avoid water spilling out of the tower.

Advantages

Low-noise control principle

Lower noise from the sound source.The special power machine is filled closed automatic cooling type low-noise cooling tower.Such kind of machine is good at water-proof performance, low in noise.

1.Low-speed fan to avoid excessive mist into the air.

2.FRP body contains stable materials resisting ultraviolet radiation with a long service life.

3.Filled with round counterflow model film.

4.Rotating pipe distributing model.

5.The structure contains rust-removing and high-strength galvanized steel which can bear corrosion and can be easily assembled.

6.Different types(standard,low-noise,high-temperature and industrial type) to meet your needs.

Main Features

1, Cooling tower is mainly used for cooling in air conditioning system, frozen series, injection molding, leather, foam, power generation, steam turbine, aluminum processing, air compressors, industrial cooling water and other fields;

2, Most used for air conditioning cooling, freezing, plastic chemical industry;

3, Closed circuit cooling tower have the Attractive shape: the Small dimension of shape, the low height of the tower, light weight of tower, and multiform layout in covering the area.